Collection — Unitank conical fermenters

Jacketed conical fermenters.
At every scale you brew.

The Unitank is Bräu Supply's stainless conical fermenter — jacketed, pressure-capable, sanitary tri-clamp throughout. Same vessel that ships inside our BräuPro brewhouses, sold on its own to pair with any tri-clamp hot side, double your fermentation capacity, or replace whatever plastic conical, carboy bucket, or band-heater compromise you're still tolerating. Three scales: homebrew 5G–20G, 1 BBL pilot, and 3–5 BBL production.

★★★★★ 4.9 · 320 verified reviews

Rated to 30 PSI working pressure · jacketed · tri-clamp

Designed and assembled in Vancouver, BC · Free shipping to the lower 48

Jacketed conical30 PSI working pressureClosed transfers & spundingTrub dump · yeast harvestStandard tri-clamp throughoutGlycol or tap-water cooling5G → 5 BBL
US
Free shipping to the lower 48 over $600US tariffs and duties paid by us
5d
5–10 day delivery to the USFrom our Vancouver, BC workshop
2y
2-year warranty+ lifetime parts support
∞
Serviced, not replacedEvery part individually replaceable
What makes a Unitank

A vessel built to do every cold-side job — well.

Same architecture across every scale. The geometry, the fittings, the pressure rating, the standard tri-clamp ports — these don't change when you move from 10G to 1 BBL. What changes is jacket coverage, controller, and how much beer comes out the bottom.

01

Pressure-capable to 30 PSI

Spund, carbonate, and closed-transfer to keg without ever exposing the beer to air. No more siphons, no more bottling-bucket oxidation, no more lager that tastes like cardboard after week three.

02

True 60° conical bottom

Trub falls to the apex. Dump it through the butterfly valve after cold-crash. Harvest clean yeast for the next batch. No racking off the trub bed, no fermenter-shaped sediment cake.

03

Dimpled cooling jacket

Tap water for ales. Glycol for lagers and any temperature below ambient. The jacket holds set point within ±0.5°F across a 14-day fermentation — no band-heater swings, no fermentation chamber required.

04

Standard tri-clamp everything

1.5", 2", and 3" tri-clamp ports. No proprietary fittings, no shop-only spares. Replacement gaskets at any homebrew store, every valve serviced with a 9/16" wrench. The vessel is repaired, never replaced.

Pairs with any tri-clamp hot side

Bring your own brewhouse.

The Unitank is a standalone fermenter. It doesn't care how the wort got there — pour it in cold, or land it via tri-clamp from any compatible kettle. Common pairings on the Bräu Supply side:

Sizing

What size conical fermenter do you need?

Match the tank to your batch size. Each Unitank holds more than the batch it's sized for, so there's headspace for krausen and active fermentation stays out of the blow-off.

5 gal batches

8 gal (35 L) Unitank

For 5 gallon batches. The same tank that ships with the BräuPro 5G, and the easiest size to fit in a garage or basement.

Shop 8 gal →
10 gal batches

13 gal (50 L) Unitank

For 10 gallon batches. The same tank that ships with the BräuPro 10G.

Shop 13 gal →
20 gal batches

26 gal (100 L) Unitank

For 20 gallon batches and small pilot work. The same tank that ships with the BräuPro 20G.

Shop 26 gal →
1 BBL batches

40 gal (150 L) Unitank 1 BBL

For 1 BBL (31 gal) batches: pilot systems, nanobreweries and taprooms. The same tank that ships with the BräuPro 1 BBL.

Shop 1 BBL →
Choose your scale

Three sizes. Same architecture.

Match the Unitank to your batch size — or to the brewhouse you already own. Architecture, fittings, and parts are constant across the lineup; what changes is jacket coverage, controller, and capacity.

Homebrewing

8 · 13 · 26 gal

The fermenter that ships inside the BräuPro Homebrewing system, sold standalone. Pairs with our brewhouses or your own. Add a second to brew Saturday, ferment two batches at once.

Vessel sizes8 gal · 13 gal · 26 gal
Pairs withBräuPro 5G / 10G / 20G
JacketDimpled body jacket · tap water or glycol
Pressure rating30 PSI working pressure · spunding + closed transfer
Ships inUnder a week · in stock
From $1,999 USD8 gal · jacketed · in stock Shop Homebrew Unitank →
★ Most pilot operations

Pilot & Nano

1 BBL · 40 gal

The 40-gallon Unitank — the same vessel inside the BräuPro 1 BBL brewhouse. Commercial duty cycle, identical workflow to the homebrew line.

Vessel size1 BBL (~31 gal / 124 L finished)
Pairs withBräuPro 1 BBL · pilot brewhouses
JacketDimpled body jacket · tap water or glycol
Pressure rating30 PSI working pressure · spunding + closed transfer
Ships in0-5 days · in stock
From $2,999 USD40 gal / 1 BBL · current build · in stock Shop 1 BBL Unitank →
3 BBL · 5 BBL

Nano & Micro

Waitlist open

3 BBL and 5 BBL production-scale Unitanks. Same architecture as the homebrew line, scaled for commercial duty cycles — fully jacketed, fully insulated, with side and base jacket coverage for fast crashes on large volumes.

Vessel sizes3 BBL · 5 BBL
Pairs withBräuPro 3/5 BBL · existing breweries
JacketFully jacketed body + base · insulated
Pressure rating30 PSI · commercial PRV + manway
Ships inJoin the waitlist for pricing
On requestWaitlist open Join the waitlist →
Why the Unitank

Designed around how fermentation actually works — not around what's cheap to fabricate.

01 · Vessel design

Dedicated, not compromised

The Unitank exists to ferment beer. It isn't a kettle that someone bolted a thermowell onto — the conical bottom, jacket, ports, and pressure rating were sized for the fermentation use case from day one.

02 · Temperature

±0.5°F across a 14-day lager

A dimpled body jacket gives even, full-body cooling. Pair with glycol and a controller and you get rock-stable set points across the longest cold-side beers you'll ever make.

03 · Pressure

30 PSI · spund and transfer closed

Carbonate naturally during the tail end of fermentation. Push finished beer to keg under CO₂ without ever exposing it to air. Beer that tasted right on Day 14 tastes right on Day 90.

04 · Trub & yeast

Dump · harvest · move on

Conical bottom + butterfly valve = trub leaves cleanly, yeast harvests cleanly, and the next batch's pitch is sitting in a sanitized jar by Sunday afternoon. No racking, no second-vessel hop.

05 · Fittings

Standard tri-clamp throughout

1.5" and 2" tri-clamp at every port. Off-the-shelf gaskets, off-the-shelf valves, off-the-shelf spares. Nothing about owning a Unitank means waiting on a single-supplier part.

06 · Scale

One architecture · three scales

Learn the workflow at 13 gal. The 1 BBL and 3–5 BBL builds behave the same — same ports, same hardware, same cleaning regime. You scale your vessel, not your process knowledge.

Side by side

Compare the scales.

Same workflow, same fittings, same pressure rating. Here's where the three sizes differ.

Configuration Homebrewing 8 · 13 · 26 galIn stock Pilot & Nano 1 BBL · jacketed★ Most selected Nano & Micro 3 BBL · 5 BBL · productionWaitlist open
Vessel size

8 / 13 / 26 gal

1 BBL (~31 gal / 124 L)

3 BBL · 5 BBL

Pairs with

BräuPro 5G / 10G / 20G · any tri-clamp kettle

BräuPro 1 BBL · pilot brewhouses

BräuPro 3/5 BBL · existing breweries

Architecture

Jacketed conical · tri-clamp

Jacketed conical · tri-clamp

Jacketed conical · tri-clamp

Jacket coverage

Dimpled body jacket

Dimpled body jacket

Fully jacketed body + base · insulated

Pressure rating

30 PSI working

30 PSI working

30 PSI working

Cooling input

Tap water or glycol

Glycol recommended

Dedicated glycol loop

Ports

1.5" + 2" tri-clamp

1.5" + 2" tri-clamp

Commercial port layout

Manway

Top tri-clamp lid: 6" on 8 and 13 gal, 8" on 26 gal

Top 8" tri-clamp lid

Top 12" pressure manway

Trub dump

2" butterfly valve

2" butterfly valve

2" butterfly valve

Lead time

Ships in under a week

Ships in 0-5 days

Waitlist open

Starting price From $1,999 USD
Shop Homebrew →
From $2,999 USD
Shop 1 BBL →
On request
Join waitlist →
One architecture · three scales

Start small. Scale without rebuying the workflow.

Every Unitank uses the same fittings, same cleaning regime, same valve hardware. The vessel grows; the process you learned doesn't.

Step 1 · learn the workflow

Homebrew Unitank

8, 13, or 26 gallons. Master pressure transfers, spunding, and yeast harvest at homebrew scale.

From $1,999 USD

Scale up→
Step 2 · go commercial

1 BBL Unitank

Same valves, same ports, bigger vessel. Closed hop additions and transfers

From $2,999 USD

Production→
Step 3 · production · waitlist

3 / 5 BBL Unitank

Side manway, base jacket, commercial CIP layout. Same six accessories, same cleaning chemistry — at a scale that pays a taproom's bills.

Waitlist open

Already own a Homebrew Unitank? The 1 BBL and 3/5 BBL use the same valve, gasket, and racking-arm hardware. Your spares drawer carries over. The next vessel is just a bigger version of the one already in your garage.

Conical fermenter questions

Common questions.

What is a conical fermenter?+

A fermenter with a cone-shaped bottom. Yeast and trub settle into the point of the cone, so you dump them out through the bottom valve and leave clear beer behind, with no racking to a second vessel. A jacketed conical like the Unitank also has a cooling jacket on the outside wall, so you control fermentation temperature with glycol instead of a coil sitting in the beer.

What size conical fermenter do I need?+

Match it to your batch size: the 8 gal Unitank for 5 gallon batches, 13 gal for 10 gallon, 26 gal for 20 gallon, and the 1 BBL (40 gal) for 31 gallon batches. Each tank holds more than its batch, so there's headspace for krausen.

Is the Unitank a pressure fermenter?+

Yes. Every Unitank is rated to 30 psi working pressure. It ships with a pressure relief valve set at 15 psi (adjustable to 30) and a pressure gauge. Add the adjustable spunding valve to hold pressure during fermentation and carbonate in the tank, then push the beer to a keg under CO₂ with no air contact.

What comes with a Unitank, and what's sold separately?+

Included: the jacketed vessel, tri-clamp lid (6" on 8 and 13 gal, 8" on 26 gal and 1 BBL), three 1.5" top ports, pressure relief valve, pressure gauge, blow-off assembly, sample valve, 2" butterfly dump valve, volume ruler, legs and feet, and the tri-clamp clamps, gaskets and caps.

Sold separately: racking arm, temperature control kit (includes the thermowell), spunding valve, carbonation stone, HopDrop, CIP spray device and transfer kit. See all fermenter accessories.

Do I need a BräuPro to use a Unitank?+

No. The Unitank is a standalone fermenter. It pairs with any tri-clamp kettle — our BräuPro and Unibräu brewhouses, your existing HERMS or RIMS, or someone else's pilot system. The only thing the Unitank cares about is that wort can get into it; how that wort got made is your call.

How is this different from a Spike, Ss BrewTech, or plastic conical?+

Three things.(1) It's jacketed.Most homebrew conicals manage temperature with an immersion coil sitting inside the beer — one more thing to clean and sanitize, cooling from a single spot instead of the whole wall, and hardware in the way of your trub dump and yeast harvest. The Unitank's dimpled jacket cools from outside the vessel; nothing inside but beer.(2) Rated to 30 PSI working pressure— spund, carbonate, and closed-transfer to keg without ever exposing the beer to air.(3) Standard tri-clamp at every port, and it's the same vessel that ships inside our commercial pilot systems — the architecture you buy at 13 gal scales to 1 BBL without changing your process. Coming from Ss Brewtech? See our Ss Brewtech Unitank alternative page for a side-by-side.

Tap water cooling or glycol — which do I need?+

Tap water works for ales fermenting at 65–72°F if your tap is cold enough year-round — which it isn't, for most of North America in summer. Glycol is required for lagers, cold-crash, and anything where your set point is below ambient. See our glycol chillers, and the glycol chiller sizing guide to pick one.

Can I run two batches on one BräuPro?+

Yes — that's the most common second-purchase pattern. Brew on Saturday, ferment in Unitank #1, brew the next batch the following weekend, ferment in Unitank #2. The BräuPro brewhouse runs back-to-back at whatever pace you want; only the fermenters are the throughput bottleneck. Add a second Unitank in the same size class and you've doubled your output.

What's the warranty?+

2 years on the stainless: the vessel, every weld and TC port, grain baskets, brew tables and stainless fittings.

1 year on electronics: controllers, pumps, heating elements, solenoid valves and temperature probes, whether they come with a system or are bought on their own. Not covered on elements: dry-firing (running the element without liquid covering it), and heat or melt damage at the twist-lock plug from a loose or improper connection — a proper, fully seated connection has to be maintained.

Gaskets, clamps and O-rings are consumables; replacements are in stock and cheap. Warranty replacement parts are free, and we bill the shipping at cost. If we need the faulty part back, we send you a prepaid label.

Lifetime parts support on everything we build — serviced, not replaced. Orders placed before October 8, 2026 keep the warranty terms they were sold with.

When do the 3 BBL and 5 BBL Unitanks ship?+

Join the waitlist and we contact you as build slots open. Waitlist members get priority and pricing first. No deposit; joining is non-binding.

Still have questions? Talk to a brewer, not a sales rep. Email or call us during US business hours.

One vessel. Every cold-side job.

Pick the scale that fits today — the architecture, fittings, and workflow stay constant when you grow.