Custom Unibräu Builder

Build the Unibräu of your dreams using the personalizer button above. All Unibrau Systems include a Kettle, Grain Basket, and Grain Basket Lid. 

The Unibräu is your all in one brewing system which makes any type of craft beer from grain.  It is modular in its design and starts with our amazing brew kettle and removable grain basket.  It is built from stainless steel and only the highest quality components, has a 10.5 Gallon (40L) capacity and can brew up to 6 Gallons (23L) of beer in a single session.  Commercial brewery grade disconnects are featured throughout the system for easy assembly, cleaning, and integration with your existing brewery.



The Unibräu is powered by electricity and plugs into a regular household outlet.  An ultra low watt density 304 stainless steel heating element is supplied with the brewing system.  This element eliminates scorched wort and is easily removed for an efficient clean up.  It can quickly and safely ramp up the heat between mash steps and can get you to a boil after mash out in as little as 30 minutes.Our robust aluminum clad, water resistant dual stage temperature controller has been designed to be simple and easy to use.  Just select your desired mash temperature and begin brewing.  Manual step mashes are easy to perform and we even included a cooling output, should you want to manage fermentation temperatures in your brew room, or control the flow of water through the included counterflow chiller.  Accurate temperature sensing is done with the removable 304 stainless steel temperature probe.Our high quality stainless pump has been fitted to circulate the wort over the grain bed while mashing for maximum efficiency.  It can also be used to push the wort through the included plate chiller during the cooling stage for efficient cooling of the wort.  Plus, you can use it during the cleaning phase to get ready for your next brew!   

Grain Basket:

Our robust one piece 304 stainless steel grain basket allows you to brew up to 20 lb (9.5kg) of grain.   To remove the grains, simply lift and turn the basket 45º to rest the silicone covered posts of the grain basket on the specially designed grain rest. You can now choose to begin the boil process, or proceed to batch sparge over top of the grains if you wish.   

Wort Chiller:

Unibräu comes with a high efficiency counterflow wort chiller.  We designed this chiller to minimize clogging, yet retain the highest efficiency only achieved by plate chillers. It features the same tri-clover compatible quick disconnect fittings featured on the rest of the brew system, and simply attaches to the pump.  It comes assembled, with a garden hose connection, and a faucet adapter included.  A counterflow chiller exchanges the heat of the boiling wort to the incoming tap water in the most efficient manner, providing instant cooling.  This means instant transfer of the wort directly into your sanitized fermenter, without a secondary pass through the chiller, reducing the chance of contamination.  The chiller can cool your wort to within 5 degrees of incoming water temperature, and does so in as little as 10 minutes.

Specifications and what's included:

  • 304 stainless steel kettle and grain basket.  1mm thick kettle body, 5mm tri-clad base.  1.5" Tri-clamp fittings and silicone gaskets throughout.
  • 120V 15A GFCI household power
  • International version 240V 10A GFCI household power
  • 10.5 gallon (40L) capacity
  • 20 lb (9.5kg) grain capacity
  • 304 stainless steel magnetic drive pump with IP55 protection from beer splashes and spills
  • Dual stage controller with fermentation control
  • Removable 1600w stainless steel brewing element  With 6.35gal (24l) liquid temperature rise = 1.6deg/min or from mash out to boil for a standard 5gal batch is around 28 minutes.
  • 304 stainless steel plate chiller with garden hose and faucet connections
  • We now sell an optional element upgrade kit which adds an extra element to the system for faster boil times.


We love brewing with our Unibräu and we're sure you will too.  We are here to help you get started, and to answer any brewing related questions you may have.  Feel free to drop us a line, or reach out to us on our question? page.


The Unibräu comes with a full 12 month warranty, and we believe it'll last you a lifetime. The included brewing elements are warrantied for 90 days.  If you are not fully satisfied with the Unibräu, you are welcome to return it to us for a refund within 30 days.  



Unibräu manual
Beersmith Profile
ETC Controller manual



Check out this review on Reddit 

Brülosophy V2 review


Controller - Now you have a choice between our ETC controller or EZboil.

120V - Our standard 120V system ships with a 1600W element, and it is possible to speed up your brew day with our element upgrade kit (sold separately) providing you have another separate GFCI circuit nearby.

240V International -  It features the same  ETC or  EZboil controller, in 240V.  We mate it with our 240V 2000W element, and this setup will work in most countries with voltage from 200-240V.  The circuit required is 10 Amps.

 Please Note:  Power cord for 240V international version is not included.  A standard C13 cord can be purchased here to work with your country.

240V - This option is for those who want the fasted brew day possible.  The 120V element is substituted for our 4000W element and SV240 controller which connects with the Unibräu ETC for simple and very precise control over your mash temperature.  Temperature rise with this setup is an amazing 4ºF/min, which means achieving a boil from mash out in 11 minutes!  With this set up you can still brew with 120V, or 240V giving you the most flexibility.  A 30A outlet is required for 240V operation.